View 1 2 3

Urban Sources for Parks

At BENITO, we offer a wide variety of urban fountains for public spaces, made of iron and stainless steel, providing excellent resistance to corrosion and requiring almost no maintenance. We have models adapted for both adults and children, as well as special fountains for dogs, such as our HUSKY and TERRIER fountains. If in doubt, consult with our commercial team, who will advise you on the best option to suit the desired environment. We are sure to have the urban fountain you are looking for, whether for a park, beach, garden, etc.

Fountain

UM508 FONTI

Fountain FONTI, total dimensions (Ø x H) 310 x 985 mm, made of cast iron (treated with the Ferrus process, the triple-layer protection for iron, which guarantees optimal corrosion resistance), with a side push button. Prepared for anchoring with three M8 expansion bolts depending on the surface and project.

Fountain

UM508I INOX

Fountain FONTI, total dimensions (Ø x H) 370 x 935 mm, made of stainless steel, polished stainless steel finish. Prepared for anchoring with three M8 expansion bolts according to surface and project.

Fountain

UM509 FONTI

Fountain FONTI, total dimensions (Ø x H) 310 x 850 mm, made of granite-white precast concrete. Prepared for anchoring with three M8 expansion bolts, depending on the surface and project.

Fountain

UM510-1 EGEA

EGEA SIMPLE MINI designer fountain set, total dimensions (Ø x H) 195x1000 mm, made of iron (treated with the Ferrus process, the triple-layer protector for iron, which guarantees optimal corrosion resistance), includes a push-button tap (UM510G) with a nickel-plated steel support. Angle frame and Drain grate made of galvanized steel. Prepared for anchoring with 4 expansion bolts according to surface and project.

Fountain

UM510G GRIFO NIQUELADO

The 1/2" push-button fountain tap is designed for installation in public Fountains , drinking fountains, and outdoor sinks. It features a 1/2" male BSP connection thread and a compact body measuring approximately 110 mm in length and 35 mm in diameter , with a 40 mm push-button for comfortable and safe operation. Made of high-quality chrome-plated brass , it guarantees excellent resistance to corrosion and weathering. It incorporates a timed mechanism with automatic closing, which ensures efficient use of water and prevents waste. Its stainless steel internal cartridge and EPDM gaskets provide durability and watertightness even under conditions of intensive use. The glossy polished finish gives the unit a modern, easy-to-clean appearance, maintaining its aesthetic appeal in urban environments.

Fountain

UM511-1M ATLAS

ATLAS SIMPLE designer fountain set, total dimensions (length x width x height) 300x300x1010 mm, made of iron (treated with the Ferrus process, the triple-layer protector for iron, which guarantees optimal corrosion resistance), includes a nickel-plated steel fixing plate-push-button tap (UM510G). Angle frame and Drain grate are made of galvanized steel. Includes a push-button tap. Prepared for anchoring with 4 M12 expansion bolts according to surface and project.

Fountain

UM511-2M ATLAS DOBLE

ATLAS DOUBLE designer fountain set, total dimensions (length x width x height) 1136x300x1010 mm, made of iron (treated with the Ferrus process, the triple-layer protector for iron, which guarantees optimal corrosion resistance), includes a nickel-plated steel push-button tap fixing plate (UM510G). Angle frame and Drain grate are made of galvanized steel. Prepared for anchoring with 4 M12 expansion bolts according to the surface and project.

Fountain

UM540I DUAL

DUAL designer Fountain , total dimensions (length 1 x length 2 x height) 700 x 550 x 1040 mm, made of stainless steel, with a gloss and satin finish and ergonomic fittings. Environmentally friendly: with adjustable water flow rate, which helps save water consumption. Prepared for anchoring with three M12 expansion bolts, depending on the surface and project.

Fountain

UM542 ACCESS

ACCESS designer Fountain , total dimensions (length x height) 510 x 1000 mm, made of steel (treated with the Ferrus process, the triple-layer protection for iron, which guarantees optimal corrosion resistance), RAL 6029 green trim, shiny and satin stainless steel splashback, ergonomic, environmentally friendly grommets. Prepared for anchoring with three M12 expansion bolts depending on the surface and project.

Fountain

UM550 HUSKY

HUSKY designer Fountain , total dimensions (length x height) 300x1010 mm, made of steel (treated with the Ferrus process, the triple-layer protector for iron, which guarantees optimal resistance to corrosion), AISI 304 stainless steel bowls with a satin finish (low bowl height: 200 mm, high bowl height: 980 mm), with 2 push-button taps at two heights, one adapted for dogs, ergonomic, ecological shouting. Prepared for anchoring with 4 M8 expansion bolts according to the surface and project.

Fountain

UM550G ACCESS

The 1/2” drinking fountain tap is designed for public Fountains and hydration points, offering a comfortable and targeted flow that facilitates direct water consumption. It has a 1/2” male BSP connection thread , compatible with most standard installation systems. Its compact body, with ergonomic lines, allows smooth operation using a top lever , guaranteeing accessible and precise use. Made of high-quality chrome-plated brass , it has excellent resistance to corrosion, UV rays and intensive outdoor use . It incorporates a highly durable internal mechanism with EPDM seals and stainless steel components, which ensure perfect tightness and prolonged operation. Its design focused on comfort and hygiene allows for controlled water projection, avoiding splashing and waste. The tap combines robustness, efficiency and aesthetics, making it ideal for urban facilities and public use environments.

Fountain

UM551 TERRIER

Terrier designer Fountain , total dimensions (length x height) 300 x 1010 mm, made of steel (treated with the Ferrus process, the triple-layer protection for iron, which guarantees optimal corrosion resistance), stainless steel bowl, includes taps, water inlet hose, and drain pipe. Exclusively for dogs, eco-friendly. Prepared for anchoring with four M8 expansion bolts according to the surface and project.

Fountain

UM555 TREE

TREE designer Fountain , total dimensions (length x height) 705 x 1145 mm, made of steel with Ferrus treatment (the triple-layer protection for iron, which guarantees optimal corrosion resistance). Glossy and satin-finished stainless steel splashback. Includes ergonomic and environmentally friendly faucets (with adjustable water flow for easy water savings). Prepared for anchoring with three M12 expansion bolts, depending on the surface and project.

Fountain

UM560-1M GES

GES designer Fountain , overall dimensions (length x width x height) 800x300x1020 mm, manufactured from eco-friendly COMVEG (plant-based Composites ) with a Corten steel effect, painted throughout. This reduces environmental impact, is weather-resistant, and water-repellent. It includes a ductile iron grate, nickel-plated tap, and support bracket. Prepared for anchoring with four Ø10 screws, depending on the surface and project requirements.

Fountain

UM565 PETRUS

PETRUS designer Fountain , total dimensions (Ø x H) 350 x 970 mm, made of concrete. Robust, with an elegant and lightweight design, it can blend into any unique setting. Easy to install, it comes equipped with the necessary connections for water inlet and drainage. It does not require grates or visible drains, and is free of splashing, rust, maintenance, water buildup, unpleasant odors, etc. Accessible, can be used by a wheelchair user.  

Fountain

UM570 CORC

The Fountain Corc has a simple structure with a square iron body treated with Ferrus, a protective process for iron that guarantees optimal corrosion resistance. Epoxy primer and hammered gray polyester powder paint finish. Nickel-plated steel push-button faucet fixing plate (UM510G). Galvanized steel corner frame and Drain grate. Accessible design, with faucet height according to order TMA/851/2021